ASATI Featured ProjectsUpdatesASATI Video GalleryASATI Photo GalleriesContact ASATI
 
 
TEXAS TECH UNIVERSITY- MULTI-SPORTS TRAINING FACILITY

FACILITY SPECIFICATIONS

The Texas Tech Athletic Training Facility is the largest vinyl polyester fabric air supported structure roof in the world.  Fiberglass has been more traditional until Texas Tech University, along with ASATI, constructed this Dupont Tedlar sports facility.  The fabric is highly translucent, providing over 1000-foot candle of natural light within the structure during daytime hours.  The total roof structure is constructed with a dual wall system, which provides excellent thermal insulation without sacrificing the natural light penetration for allowing the facility to be used without the high energy cost for operating artificial lighting.

ASATI engineered, manufactured, and installed this facility in 1985. The total 100,000 square foot structure roof was manufactured in three sections.  The entire roof structure was installed and ready for use in three days after site delivery. The roof structure final assembly weights 30,000 lbs. and is engineered to withstand Lubbock, Texas code wind speeds of up to 120 mph.

Size 
300 ft. diameter with 100,000 sq. ft.
1st floor: 72,000 sq. ft.
2nd floor: 28,000 sq. ft.

Building Height 
Subterranean: 14’0”
1st floor: 10’0”
Dome: 45’0”
Total Height: 69’0” (57’0” from grade)

Roof
Cable restrained air structure with Tedlar coated, vinyl polyester fabric.

Exterior Fabric Envelope:
Translucent DuPont Tedlar 28 ozs. per square yard

Interior Thermaliner
Exclusive Rip Stop Construction

Thermaliner Patents
Fraioli R4 & Fraioli R8

Doors
Wood, metal, glass, revolving; aluminum frame, steel frame, storefront system, glass pane

Anchorage System
Continuous Steel Angle

Field Junction Seam Joints
(2) Mechanically sealed joints with aluminum non-rusting clamps.

Warranty
15 years Pro Rata on air structure fabric envelope material & workmanship

Building Codes
Exceeds standards for AISC, BOCA, ICBO, IBC, CSA and NFPA 701 and the IFAI “Minimum Design Standards for Air Supported Structures.”

View more project profiles or look through the photo gallery.

Air Structures American Technologies, Inc.  |  211 South Ridge Street  |  Rye Brook, New York 10573 
(P) 800.AIR.BLDG  |  (F) 914.937.6331  |  (E)
info@asati.com